Gvrp And Ingress Filtering Settings - Intel Express 530T User Manual

C H A P T E R
LOCATION
Main Menu
Configure VLAN
GVRP and Ingress...
NOTE
In order for GVRP to work, the
port must be connected to
another switch that supports
GVRP.
96
®
5 Intel Express 530T Switch Users Guide

GVRP and Ingress Filtering Settings

Description
Select switch: Use the z to select a switch to configure.
Configure ports: Use the z to toggle the range of ports that you
can configure.
GVRP: Allows the switch to create VLANs dynamically. Use the
z to toggle the action for each port. Options are:
• <Enabled>: The switch monitors traffic on this port for GVRP
requests from network nodes. If a GVRP-enabled device sends a
request to this port, the switch creates a VLAN dynamically and
adds the requesting device to the new VLAN. This is the default
setting.
• <Disabled>: The switch ignores GVRP requests in incoming
packets on this port.
Ingress Filtering: Lets the switch filter incoming packets based on
VLAN membership. Use the z to toggle the action for each port.
Options are:
• <Enabled>: Incoming packets belonging to a specific VLAN are
forwarded only if the port belongs to that VLAN. This is the
default setting.
• <Disabled>: All packets coming into the port will be forwarded,
regardless of the port's VLAN membership.