Configure Static Mac Addresses - Intel Express 530T User Manual

C H A P T E R
LOCATION
Main Menu
Configure Stack
Forwarding and Filtering
Configure Static MAC...
NOTE
If tag-based or port-based
VLANs are currently running,
you must assign each static
MAC address to a specific
VLAN.
5 Using Local Management

Configure Static MAC Addresses

Description
Static MAC addresses are MAC addresses that remain in the switch's
address table, whether the device is physically connected to the switch.
After you define a static MAC address, it remains in the switch's address
table until you remove it.
Enter MAC: Type the MAC address you want to permanently add to the
address table.
VLAN or VLAN ID (when port-based or tag-based VLANs are
running): When VLANs are active on the switch you can define static
MAC addresses for each VLAN. If port-based VLANs are active press
the z to select a VLAN. If tag-based VLANs are active type the
VLAN ID that the static MAC address will be assigned to.
Select switch: Use the z to select the switch you want to
configure.
Select port: Use the z to select a port on the switch where the
switch forwards traffic.
ADD/DELETE: Use these buttons to add or remove a MAC address
from the switch's table.
67