Configuring A Port - Intel Express 530T User Manual

C H A P T E R
NOTE
If you change the flow control
or IP settings, you must reboot
the switch before the new
settings can take effect.
34
®
4 Intel Express 530T Switch Users Guide

Configuring a Port

You can use the Web Device Manager to enable or disable a port, and to
change its speed, duplex, flow control, and priority settings.
To change port settings
1 Click the Configure Stack menu and then click Port Settings. To
access the Port Settings screen for each port, click the port you want
to configure on the faceplate graphic.
2 Click the options you want to change.
• Port State: Enable or disable the port.
• Speed/Duplex: Set port speed to Auto-Negotiate, 10Mbps,or
100Mbps.
• Flow Control: Enable or disable flow control.
• Priority Queue: Set the priority queue for packets sent or
received on this port.
3 Click Submit.