Intel Express 530T User Manual page 16

C H A P T E R
Control switch
Member 2 (connected
to the Switch 1 port)
Member 3 (connected
to the Switch 2 port)
Member 4 (connected
to the Switch 3 port)
NOTE
When setting up a stack, stack
the 535T switches in the order in
which they are connected to the
Matrix Module.
The 535T connected to the
Switch 1 port of the Matrix
Module would be the switch
directly under the control switch,
the 535T connected to the Switch
2 port would be underneath that,
etc.
This makes it easier to determine
which switch is which when
managing them.
10
®
1 Intel Express 530T Switch Users Guide
Assemble a stack
To stack a 530T with 535Ts, you need to purchase a Stack Matrix
Module.
1 Insert the Stack Matrix Module into the slot in the back of the 530T,
labeled Matrix Module, and tighten the screws.
Module A (Gigabit)
Stack Interface Module
2 Run a cable from the slot in the back of the 535T, labeled Stack
Interface Module, to the control switch's Stack Matrix Module,
where it reads "Switch 1." This connection makes this 535T switch
Member 2 in the stack.
3 Repeat step 2 until you have added all member switches (535Ts) to
the stack. You can add a total of three member switches.
4 Power on the control switch.
Which switch is which in a stack
In a stack of switches, the 530T is the control switch and the 535Ts are
member switches.
The switch that you connect to the port labeled Switch 1 in the 530T's
Stack Matrix Module is referred to in the Web Device Manager and
Local Management as Member 2. The switch connected to the port
labeled Switch 2, is Member 3. And the switch connected to the port
labeled Switch 3, is Member 4.
Stack Matrix Module
Intel ® Express 530T Matrix Module
Switch 1 Switch 2 Switch 3
Matrix Module
Connect to Matrix Module
Stack Interface Module
Connect to Matrix Module
Stack Interface Module
Connect to Matrix Module
Stack Interface Module
AC Input
100-240 VAC
50Hz-60Hz
1.5A max
009027390008
MAC Address
AC Input
100-240 VAC
50Hz-60Hz
1.5A max
AC Input
100-240 VAC
50Hz-60Hz
1.5A max
AC Input
100-240 VAC
50Hz-60Hz
1.5A max