Intel Express 530T User Manual page 45

C H A P T E R 4 Using the Web Device Manager
Tag-based VLAN
You configure a tag-based VLAN by configuring port membership and
ingress/egress rules. It is important to note whether the devices in your
VLAN support 802.1Q VLAN tags. If some of your devices don't
support tagging, additional configuration may be necessary.
To configure a tag-based (IEEE 802.1Q) VLAN
1 Create a VLAN and assign member ports.
• Click the Configure VLAN menu and then click Tag-based
(IEEE 802.1Q) VLAN.
• From the main Tag-based VLAN page, click Add to create a new
VLAN. To modify an existing VLAN, click the VLAN name and
click Edit.
• If you are creating a new VLAN, type a name and VID (from 2
to 4094) to identify it.
• In the Switch Unit box, select a switch whose ports you want to
include in the VLAN. You can include ports from any/all
switches in a tag-based VLAN.
• To add a port to the VLAN, click the port in the Available ports
box and click Add. To remove a port, click the port in the
Member ports box and click Remove.
• The switch supports a maximum of 24 IGMP (Internet Group
Multicast Protocol) Snooping sessions to manage broadcast
traffic. If you want the VLAN to be part of an IGMP Snooping
session, select the Enable IGMP Snooping check box.
• When you have finished adding ports, click Next.
39