Ip Settings - Intel Express 530T User Manual

C H A P T E R
LOCATION
Main Menu
Configure Stack

IP Settings

NOTE
The default IP address for the
switch is 192.0.2.1
If the 530T is in a stack of
switches, there is only one IP
address.
Default VLAN for SNMP agent:
Port-based: DEFAULT_VLAN
802.1q-based: VID=1
56
®
5 Intel Express 530T Switch Users Guide
IP Settings
Description
Switch MAC address: The unique hardware address assigned by Intel.
Current settings: The switch's current IP configuration.
New settings: Assign a new IP configuration to the switch.
• Assign IP: Indicates if the switch will use a BOOTP or DHCP
server to obtain an IP address dynamically, or if you will assign
an address manually.
• IP address: The IP configuration used by the switch. Use the IP
address shown here to access the switch through Telnet or a ping
test.
• Subnet mask: Should match the mask for other devices on the
network.
• Default gateway: The IP address of the device that routes to
different networks—typically, a router or routing server. Set this
option to manage the switch remotely.
• VLAN or VLAN ID (port-based or tag-based VLANs only):
Specify a VLAN where the switch's SNMP management agent
will reside. This option appears only when port-based and IEEE
802.1Q VLANs are active on the switch.
SUBMIT: Submits the changes and returns you to the Configure Device
screen. You must save the changes to the switch's flash memory and
reboot the switch for the new IP settings to take effect.