Installing A New Device - Intel Express 530T User Manual

C H A P T E R
NOTE
The 530T sends BootP
requests for several minutes;
after that time, if no IP has
been entered, the switch stops
sending the request and
continues to boot.
In a stack of switches, only one
MAC address (the control
switch's MAC address) is
discovered.
24
®
3 Intel Express 530T Switch Users Guide

Installing a New Device

After you've installed a new switch on your network, you can use Intel
Device View's Device Install Wizard to configure it for management.
To install and configure a new switch for
management
1 Start Intel Device View. The Device Install Wizard appears. If it
doesn't appear, click Install from the Device menu or double-click
the appropriate MAC address in the Device Tree under Unconfig-
ured Devices. (The MAC address is located on the rear of the
switch.)
2 On the Device Install Wizard - Start screen, click Next.
3 On the Device Install Wizard - MAC Address screen, click the MAC
address of the new switch and then click Next.
4 Follow the instructions in the wizard to assign an IP address and a
name to the switch (or stack of switches).