Edit An Ieee 802.1Q Vlan (Configure Port Membership) - Intel Express 530T User Manual

C H A P T E R
LOCATION
Main Menu
Configure VLAN
Edit IEEE 802.1Q VLAN
NOTE
A '+' next to the Member
toggle indicates that the port is
a member of more than one
VLAN.
5 Using Local Management
Edit an IEEE 802.1Q VLAN
(Configure Port Membership)
Description
VLAN name: Name of the VLAN you are editing or deleting.
VLAN ID: Assigns a unique ID number to the VLAN. This number will
be used to identify all packets belonging to that VLAN. Type in a number
from 2 to 4094.
Allow IGMP snooping: Press the z to determine if the switch
will perform IGMP snooping on this VLAN. There are a maximum of 24
IGMP snooping sessions allowed.
Select switch: Press the z to select a switch to configure.
Member: Determines which ports are part of the VLAN being created.
Press the z to toggle the field for the following options:
• <Yes>: The port will be a member of the VLAN.
• <No >: The port will not be a member of the VLAN.
• – : The port is part of an aggregated link.
NEXT: Select this button and press e to access the Edit an IEEE
802.1Q VLAN (Configure Port Tagging) screen.
93