Using Local Management; Accessing Management - Intel Express 530T User Manual

5
NOTE
When running HyperTerminal
on Windows 2000, use the
T b
and keys rather
than the arrow keys to move
between fields.
NOTE
You use the same user name
and password to log into Web
Device Manager and Local
Management.
Using Local
Management
Overview
Another way to configure the switch is through the Local Management
interface. Local Management provides the same functionality as the Web
Device Manager using a text-based interface.

Accessing Management

You can access Local Management two different ways: connect directly
to the switch's serial port, or through a Telnet session (using either an IP
address you assign or the default IP address of 192.0.2.1).
Using the serial port
1 Use the enclosed null modem cable to connect the serial port of your
PC to the serial port of the switch.
2 Start a terminal emulation program (such as HyperTerminal* in
Windows* 2000). Use these communication parameters:
• 9600 baud
• 8 data bits
• No parity
Press E to connect to the Local Management.
3 Log on to Local Management. By default, no password or user name
is assigned. To assign them, see the section titled User Accounts in
this chapter.
• 1 stop bit
• No flow control