Add An Ieee 802.1Q Vlan (Configure Port Membership) - Intel Express 530T User Manual

C H A P T E R
LOCATION
Main Menu
Configure VLAN
Create an 802.1Q VLAN
NOTE
Devices on the network must
have the same VID as the
VLAN to be on the VLAN and
be able to communicate.
NOTE
A '+' next to the Member
toggle indicates that the port is
a member of more than one
VLAN.
88
®
5 Intel Express 530T Switch Users Guide
Add an IEEE 802.1Q VLAN
(Configure Port Membership)
Description
VLAN name: This field allows you to assign a name to the VLAN. The
name can consist of any character (no spaces) and be up to 12 characters
long. Once a VLAN is created the name cannot be changed.
VLAN ID: Assign a unique ID number to the VLAN. This number will
be used to identify all packets belonging to that VLAN. Type in a number
from 2 to 4094. The DEFAULT_VLAN (created when you select a
VLAN operation mode) is assigned a VID of 1.
Allow IGMP snooping: Press the z to determine if the switch
will perform IGMP snooping on this VLAN. There are a maximum of 24
IGMP snooping sessions allowed.
Select switch: Press the z to select a switch to configure.
Member: Identifies which ports will participate in the VLAN being
created. Press the z to toggle the field for the following options:
• <Yes>: The port is a member of the VLAN
• <No >: The port is not a member of the VLAN.
• – : The port is part of an aggregated link.
NEXT: Select this button and press e to access the Add an IEEE
802.1Q VLAN (Configure Port Tagging) screen.