Multifunction board
Description
Multifunction board (includes LED light pipe)
Before removing the multifunction board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the service door (see
6.
Remove the optical drive (see
bay hard drive on page
7.
Remove the keyboard (see
8.
Remove the top cover (see
Remove the multifunction board:
1.
Position the top cover upright with the front toward you.
Battery on page
46).
Service door on page
Optical drive on page
59).
Keyboard on page
63).
Top cover on page
72).
48).
57) or upgrade bay hard drive (see
Component replacement procedures
Spare part number
733639-001
Upgrade
77