Removal And Replacement Procedures For Customer Self-Repair Parts; Component Replacement Procedures; Battery - HP ZBook 17 Service Manual

5 Removal and replacement
procedures for Customer Self-
Repair parts
CAUTION:
supported by the Customer Self-Repair program may void your warranty. Check your warranty to
determine if Customer Self-Repair is supported in your location.

Component replacement procedures

This chapter provides removal and replacement procedures.
There are as many as 120 screws that must be removed, replaced, or loosened when servicing the
computer. Make special note of each screw size and location during removal and replacement.

Battery

Description
8-cell, Li-ion 2.8 Ah (83 WHr)
8-cell, Li-ion 2.8 Ah (75 WHr)
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the battery:
1.
Position the computer upside down on a flat surface, with the front toward you.
2. Slide the battery release latch (1) to release the battery.
46 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
The Customer Self-Repair program is not available in all locations. Installing a part not
Spare part number
708456-001
708455-001