System Board Protective Cover - HP Spectre x360 Maintenance And Service Manual

15. Peel the wireless antennas (1) off the display back cover, and then release the wireless antenna
cables from the retention clips (2) built into the display back cover.
The wireless cables and antennas are available as spare part number N66419-001. The wireless
cables and antennas are also included in the display rear cover spare part kit.
To reassemble and replace the display assembly, reverse these procedures.

System board protective cover

To remove the protective cover from the system board, use this procedure and illustration.
Table 5-3 System board protective cover description and part number
Description
Misc parts kit
Before removing the system board protective cover, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
Remove the system board protective cover,:
Preparation for disassembly on page
Bottom cover on page 32).
Spare part number
N66414-001
32).
System board protective cover 47