Navigating And Selecting In Computer Setup; Restoring Default Settings In Computer Setup - HP ZBook 17 Service Manual

Mobile workstation
Hide thumbs Also See for ZBook 17:
Table of Contents

Advertisement

Navigating and selecting in Computer Setup

To navigate and select in Computer Setup, follow these steps:
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
NOTE:
keyboard to navigate and make selections in Computer Setup.
2.
Press
f10
To select a menu or a menu item, use the
press enter, or use a pointing device to click the item.
To scroll up and down, click the up arrow or the down arrow in the upper-right corner of the
screen, or use the up arrow key or the down arrow key on the keyboard.
To close open dialog boxes and return to the main Computer Setup screen, press esc, and
then follow the on-screen instructions.
To exit Computer Setup menus, choose one of the following methods:
To exit Computer Setup menus without saving your changes:
Click the Exit icon in the lower-right corner of the screen, and then follow the on-screen
instructions.
– or –
Use the
enter.
To save your changes and exit Computer Setup menus:
Click the Save icon in the lower-right corner of the screen, and then follow the on-screen
instructions.
– or –
Use the
enter.
Your changes go into effect when the computer restarts.

Restoring default settings in Computer Setup

NOTE:
Restoring defaults will not change the hard drive mode.
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2.
Press
f10
You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the
to enter Computer Setup.
tab
key and the arrow keys to select File > Ignore Changes and Exit, and then press
key and the arrow keys to select File > Save Changes and Exit, and then press
tab
to enter Computer Setup.
esc
while the "Press the ESC key for Startup Menu"
tab
key and the keyboard arrow keys and then
esc
while the "Press the ESC key for Startup Menu"
Using Computer Setup
111

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zbook 17 series

Table of Contents