HP ZBook 17 Service Manual page 100

13. Remove the six Torx T8M2.5×7.0 screws (1) that secure the panel to the enclosure.
NOTE:
enclosure.
14. Lift the top of the display panel, and then remove the panel from the enclosure (2).
15.
If you need to remove the display hinge brackets from the display enclosure:
NOTE:
733634-001.
a. Remove the four Phillips PM2.0x3.0 screws (1) that secure the display panel to each hinge.
b. Remove the hinge brackets from the display panel (2).
88 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
If tape secures the panel to the enclosure, lift the tape to disengage the panel from the
Display hinge brackets are available in the Hinge Kit using spare part number