HP ZBook 17 Service Manual page 72

3. Loosen the captive Phillips screw (2) that secures the upgrade bay hard drive carrier to the
computer, and then insert a flat-bladed screwdriver or similar tool into the upgrade bay hard drive
tab access (3) and press the tab to the left to release the upgrade bay hard drive carrier from the
computer (4).
4. Remove the 2 Phillips PM2.0×5.0 screws (1) that secure the top bracket to the hard drive carrier,
and then remove the bracket from the carrier (2).
5. Remove the 4 Phillips PM2.5×3.0 screws (1) that secure the hard drive to the carrier, and then
pull the hard drive away from the connector (2) to disengage it.
60 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts