TouchPad board
Table 5-6
TouchPad board, bracket, and cable descriptions and part numbers
Description
TouchPad board
TouchPad bracket
TouchPad cable
Before removing the TouchPad board, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the TouchPad board:
1.
Remove the four Phillips M2.0 × 2.5 screws (1) that secure the TouchPad bracket to the TouchPad, and
then remove the TouchPad bracket (2).
2.
Disconnect the cable from the TouchPad board ZIF connector (1).
3.
Remove the three Phillips M2.0 × 2.5 screws (2) that secure the TouchPad to the computer.
28
Chapter 5 Removal and replacement procedures for authorized service providers
(Preparation for disassembly on page
Computer feet and bottom cover on page
Battery on page
22).
Spare part number
L50832-001
L36910-001
L36898-001
20).
20).