Using Multiboot; About The Boot Device Order; Choosing Multiboot Preferences; Setting A New Boot Order In Computer Setup - HP ZBook 17 Service Manual

Using MultiBoot

About the boot device order

As the computer starts, the system attempts to boot from enabled devices. The MultiBoot utility, which is
enabled at the factory, controls the order in which the system selects a boot device. Boot devices can
include optical drives, diskette drives, a network interface card (NIC), hard drives, and USB devices.
Boot devices contain bootable media or files that the computer needs to start and operate properly.
NOTE:
Some boot devices must be enabled in Computer Setup before they can be included in the
boot order.
You can change the order in which the computer searches for a boot device by changing the boot
order in Computer Setup. You can also press
message is displayed at the bottom of the screen, and then press f9. Pressing
shows the current boot devices and allows you to select a boot device. Or, you can use MultiBoot
Express to set the computer to prompt you for a boot location each time the computer turns on or
restarts.

Choosing MultiBoot preferences

You can use MultiBoot in the following ways:
To set a new boot order that the computer uses each time it is turned on, by changing the boot
●
order in Computer Setup.
To dynamically choose the boot device, by pressing
●
Menu" message is displayed at the bottom of the screen, and then pressing
Device Options menu.
To use MultiBoot Express to set variable boot orders. This feature prompts you for a boot device
●
each time the computer is turned on or restarted.

Setting a new boot order in Computer Setup

To start Computer Setup and set a boot device order that the computer uses each time it is turned on or
restarted, follow these steps:
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2.
Press
3. Use a pointing device or the arrow keys to select the Legacy Boot Order list, and then press
enter.
4. To move the device up in the boot order, use a pointing device to click the up arrow, or press the
+ key.
– or –
122 Chapter 8 Computer Setup (BIOS), MultiBoot, and UEFI in Windows 7
f10 to enter Computer Setup.
esc while the "Press the ESC key for Startup Menu"
esc while the "Press the ESC key for Startup
esc while the "Press the ESC key for Startup Menu"
f9 displays a menu that
f9 to enter the Boot