Usb Board - HP ZBook 14u G6 Maintenance And Service Manual

USB board

Table 6-4 USB board and support bracket descriptions and part numbers
Description
USB board (includes support bracket and cable)
USB support bracket (included in the Bracket Kit)
Before removing the USB board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the USB board:
1. Disconnect the cable from the USB board (1).
2. Remove the two Phillips M2.0 × 3.0 screws (2) that secure the board to the computer.
3. Lift the bracket from the board (3).
4. Remove the board from the computer (4).
Reverse this procedure to install the USB board.
52 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page 34).
34).
Battery on page 46).
Spare part number
L62735-001
L62737-001