Solid-State Drive (Ssd) - Msata - HP ZBook 17 Service Manual

b. Separate the bracket from the hard drive (2).
Reverse this procedure to reassemble and install the hard drive.
Solid-state drive (SSD) – mSATA
Description
128 GB
32 GB
Before removing the solid-state drive module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5.
Remove the service door (see
Remove the solid-state drive:
1. Remove the two Phillips PM2.0×3.0 screws (1) that secure the drive to the computer.
Battery on page 46).
Service door on page 48).
Component replacement procedures
Spare part number
737343-001
737342-001
51