Installation On Other Host Computers; Changing The Configuration - Brother NC-series User Manual

Installation on Other Host Computers

Installation procedures differ somewhat for other DEC operating systems
(e.g., RSTS/E and RSX-11M-PLUS). Refer to the appropriate DEC
documentation for information on setting up LAT print queues on these
systems.

Changing the Configuration

The default configuration of Brother print servers should be adequate for
most applications. However, if you wish to change the configuration, you
may access the print server console via the NCP or NCL utilities on a VMS
system, the ccr and TELNET commands on an ULTRIX computer, or
through the serial port using DECserver-style commands. The
configuration procedure is described in detail in Appendix A. If you are
using TCP/IP it is also possible to see current network card configuration
information if you are using a web browser.
CHAPTER 8 LAT NETWORK CONFIGURATION
8-9