Brother NC-series User Manual page 4

USER'S GUIDE
SCO UNIX Configuration
Other Non-Standard Configurations
IP Address Configuration
Using the printer front panel to allocate an IP address (printers with LCD panels only)
Changing the IP Address using the BRAdmin32 application
Using DHCP to Configure the IP address
Using arp to Configure the Print Server IP Address
Using rarp to Configure the IP Address
Using BOOTP to Configure the IP Address
Configuring the IP Address with NCP or BRCONFIG
Before attempting to print
IP Security
Raw TCP ports
CHAPTER 3
WINDOWS NT AND LAN SERVER NETWORK CONFIGURATION
(TCP/IP)
Windows NT(TCP/IP) Configuration
Configuring an IP address for the Print Server
Changing the IP Address using the BRAdmin32 application
Changing the IP Address using the ARP command
Windows NT Print Queue Configuration
Windows NT 4.0 Print Queue Configuration (Printer Driver already installed)
Windows NT 4.0 Print Queue Configuration (Printer Driver not installed)
Windows NT 3.5x Print Queue Configuration
LAN Server / Warp Server Configuration
Server Configuration
Programming an IP address for the printer
Configuration Server
CHAPTER 4
WINDOWS 95/98 PEER-TO-PEER CONFIGURATION
LPR method
Changing the IP Address using the BRAdmin32 application
Installing the Brother Network Direct Print Software
Associating to the printer
Adding a Second Network Direct Print Port
HP's JetAdmin compatible method
ii
2-5
2-6
2-7
2-8
2-8
2-10
2-11
2-11
2-12
2-13
2-15
2-16
2-16
3-1
3-1
3-3
3-3
3-5
3-6
3-6
3-7
3-8
3-10
3-10
3-10
3-12
4-1
4-1
4-1
4-3
4-4
4-5
4-6