Associating To The Printer - Brother NC-series User Manual

USER'S GUIDE
8. Click the OK button. When prompted you must re-boot your computer.

Associating to the printer

1. You must now create a printer on your Windows 95/98 system using
2. Select Add Printer to begin the printer installation.
3. Click Next when you get the add Printer Wizard window.
4. Select Local Printer when you are asked how the printers is connected
5. Select the correct driver. Click Next when you are done.
6. If you have selected a printer driver that is already being used, you have
7. Select the Brother Network Direct Print port (printer name you assigned
8. Enter any desired name for the Brother printer and press Next. For
9. Windows will now ask you if you wish to print out a test page, select
You have now finished installing the Brother Network Direct Print
software.
Note
Please note that Window 95/98 store the hosts file in the default
Windows directory.
By default, the Windows 95/98 hosts file is called hosts.sam. If
you wish to use the hosts file you must rename the file to hosts (with
no extension, the .sam extension stands for sample.
the standard Windows 95/98 printer setup procedure. To do this, go the
Start button, select Setting and then Printers.
to your computer, and then push Next.
the option of either keeping the existing driver (recommended) or
replacing it. Select the desired option and press Next.
in step 6 of the Installing the Brother Network Direct Print Software
section) and press Next.
example, you could call the printer "Networked Brother Printer".
Yes and then select Finish.
4-4