Configuring The Brother Print Server (Queue Server Mode In Nds Mode) Using Bradmin32 - Brother NC-series User Manual

USER'S GUIDE
Configuring the Brother Print Server (Queue Server Mode in
NDS mode) using BRAdmin32
1. Make sure that you logged in as SUPERVISOR (Netware 2.xx or 3.xx)
2. Start the BRAdmin32 program.
3. One or more print server services will appear in the list of printers (the
4. Select the printer that you wish to configure and double click it. You
5. Select the Netware tab.
Now exit the BRAdmin32 application.
or ADMIN (Netware 4.xx).
default node names are BRO_xxxxxx_P1 or BRO_xxxxxx, where "xxxxxx"
is the last six digits of the Ethernet address).
will be asked for a password. The default password is "access".
Note
If necessary change the "Print Server Name", the default Netware print
server name will be BRO_xxxxxx_P1 where xxxxxx is the Ethernet
address of the print server. Be careful! Changing the name may impact the
configuration of other protocols because the print server service names
will be altered.
a. If it is not already selected, select Queue Server mode.
b. Select the correct NDS tree and NDS context (you can manually
enter this information, or by clicking on the down arrow by the
side of NDS tree and the Change button by the side of NDS
Context, you can let BRAdmin32 display your choices
automatically. Once you have specified this information, click
on the Change NDS queues button.
c. In the Netware Print Queues screen select the appropriate TREE
and Context and then Click the New Queue button.
d. Enter the queue name and specify the volume name. If you do
not know the volume name, select the Browse button to browse
the Netware volumes. When the information is entered correctly,
select the OK button.
e. Your queue name will appear in the TREE and Context that you
specified. Select the queue and click on Add. The queue name
will then be transferred to the Service Print Queues Window.
You will be able to see the TREE and Context information along
with the queue name information in this Window.
f. Click on the Close button. Your Brother print server will now
log into the appropriate Netware server.
1-4