Using The Control Panel To Configure Your Machine For A Network; Using Other Methods To Configure Your Machine For A Network - Brother Print Server Network User's Manual

d
Choose Static from Boot Method. Enter the IP address, Subnet Mask and Gateway (if needed) of
your print server.
®
Windows
®
Macintosh
e
Click OK.
f
With the correctly programmed IP address, you will see the Brother print server in the device list.

Using the control panel to configure your machine for a network

You can configure your machine for a network using the control panel LAN menu. See Control panel
setup on page 78.

Using other methods to configure your machine for a network

You can configure your machine for a network using other methods. See Other ways to set the IP address
(for advanced users and administrators) on page 108.
Configuring your machine for a network with an Ethernet cable connection
2
2
2
14