How To Use This Function - Brother NC-series User Manual

How to use this function

1. Select the Administrator Settings
either Log Configuration or View Print Log. By default this function
is disabled, to enable it select Log Configuration and then enable the
appropriate log. Refer to the above section for information on each log
function. When you enable logging, you must enter a password, the
default password for each log is the password of the print server, i.e.
"access". If you check the Delete the log file option, the printer will
automatically delete the appropriate log file when the PCMCIA HDD
card reaches the Maximum log file size.
2. To view the log information, select Administrator Settings and then
select the View Print Log option. You can now view all three logs,
"View Job Print Log", "View Total Job Print Log" or" View Error
Log". Select the log that you wish to view. In the View Job Print Log
option you can specify the logging information that you wish to see. For
example, you can choose to display the username details, date of print
job, area covered with CMYK (HL-2400CN only), etc... Select the
information that you wish to view and then enter the password. As with
the Log Configuration section, the password will default to "access"
3.
Note
When you are displaying the log information, you can choose to
display the information in HTML, CSV or TXT formats. If you
choose HTML, then all pages will be displayed in your web browser
as standard HTML pages. If you wish to save the data to another
application for further analysis. Select either CSV or TXT.
If you are a driver developer, you may wish to append the following
PJL control codes to your printer driver, this will allow the Log
Function to record job information, date information and user name
information.
1. Begin Filter
<ESC>%-12345X@PJL
@PJL JOB NAME="job name"
@PJL PRINTLOG ITEM=2,date
@PJL PRINTLOG ITEM=3,user name
2. End Filter
<ESC>%-12345X@PJL EOJ
<ESC>%-12345X
(Refer to Fig.10-1) and then select
10-5
CHAPTER 10 WEB FUNCTION