Lat Commands; Tcp/Ip Commands - Brother NC-series User Manual

USER'S GUIDE

LAT Commands

CLear SERVEr GRoup number
Removes LAT group membership
SET SERVer GRoup mm[-nn]
Add to current LAT group membership
SET SERVEr KEepalive nn
LAT keepalive timer (sec)
SET SERVEr NAme
Sets LAT Node name
SET SERVEr RB nn
Receive buffer max(0-5)
SET SERVEr TB nn
Transmit buffer max(0-5)
SET SERVEr TImeout nn
LAT inactivity timeout (sec)
SET SERVEr TRansmit nn
LAT transmit interval (msec)
SET SERVIce <servicename> LAT [EN|DIS]
Enable or disable LAT jobs on specified service

TCP/IP Commands

SET IP Access [EN|DIS|ALL] aa.bb.cc.dd {Mask
ee.ff.gg.hh}
Allows or prevents specified IP address from accessing print server
SET IP ADdress aa.bb.cc.dd
Sets IP address of print server
SET IP BOot n
Number of BOOTP/RARP tries
SET IP [EN|DIS]
Enables or Disables IP Processing
SET IP RArp nn
Sets procedure used by print server when obtaining its IP address. By
default the IP address is set along with a default subnet mask and a router
address that is the same as the address of the load host. By setting nn to 1,
the subnet mask is not set. If nn is set to 2, the router address is not set. If
nn is set to 3, neither the subnet mask nor the router address is set.
SET IP ROuter aa.bb.cc.dd
Sets default router address
SET IP SUbnet aa.bb.cc.dd
Sets subnet mask
SET IP TImeout n
Sets inactivity timeout (minutes)
SET SERVIce <servicename> IP [EN|DIS]
Enable or disables TCP/IP jobs on specified service
<name>
A-6