Brother NC-series User Manual page 23

USER'S GUIDE
Where tree is the NDS tree name.
Where context is the name of context where the print server
resides.
Service is the name of the service assigned by Netware print
server name (where the default services are BRO_xxxxxx_P1
for the Brother printer, where "xxxxxx" is the last six digits of
the Ethernet address.
You can also enter the TREE and CONTEXT name using your
web browser by connecting to the Brother print server using
the TCP/IP protocol and selecting the Netware protocol
configuration.
19. Use the BRCONFIG command or TELNET command: SET
NETWARE RESCAN to force the print server to rescan for file servers,
or power cycle the printer.
Note
The same services assigned by Netware print server names cannot be used
for both queue server mode and remote printer mode.
Note
If you want to enable remote printer capabilities on services other than the
default NetWare services, you must define new services that are enabled
for information on how to this.
1-12