Brother NC-series User Manual page 103

Multi-protocol print server
Table of Contents

Advertisement

USER'S GUIDE
You have now finished installing the BIP software. If you have
only one E-mail printer, go to next section, Configuring the
Remote Print Server.
11. Press OK to continue. You will then be asked to re-start your
computer.
12. One your computer has re-started you must create a printer on your
Windows 95/98/NT4.0 system using the standard Windows
95/98/NT4.0 printer setup procedure. To do this, go the Start button,
select Settings and then Printers.
13. Select Add Printer to begin the printer installation.
14. Click Next when you get the Add Printer Wizard window (Windows
95/98 only).
15. Select Local Printer (Windows 95/98), My computer (Windows
NT4.0) when you are asked how the printers are connected to your
computer and push Next.
<For Windows 95/98 users>
16. Select the desired model of the remote printer (for example, Brother
HL-series). If necessary, click Have Disk to load the driver from the
printer's installation diskette. Click Next when you are done.
17. If you have selected a printer driver that is already being used, you
have the option of either keeping the existing driver (recommended)
or replacing it. Select the desired option and press Next.
18. Select the BIP E-mail port (BIP...) and press Next.
<For Windows NT4.0 users>
16. Select the BIP E-mail port (BIP...) and press Next.
17. Select the desired model of the remote printer (for example, Brother
HL-series). If necessary, click Have Disk to load the driver from the
printer's installation diskette. Click Next when you are done.
18. If you have selected a printer driver that is already being used, you
have the option of either keeping the existing driver (recommended)
or replacing it. Select the desired option and press Next.
19. Enter any desired name for the BIP remote printer and press Next.
Note that this name does not need to match the E-mail address that
you assigned in step 7.
20. Select No when asked if you want to print a test page, unless you have
already configured the remote print server to receive BIP print jobs.
11-4

Advertisement

Table of Contents
loading

Table of Contents