Table of Contents
Advertisement
USER'S GUIDE
Configuring the Brother Print Server (Remote Server Mode in
NDS mode) using Novell NWAdmin and BRAdmin/BRAdmin32
To configure a Brother print server for remote printer mode with
NWADMIN (NetWare Administrator utility) and BRAdmin or
BRAdmin32, you will need to perform the following steps:
1. Make sure that the PSERVER NLM (NetWare Loadable Module) is
loaded on your file server and that you are logged in as ADMIN in
NDS mode on the NetWare 4.1x file server.
2. Start NWADMIN by double clicking on the icon. Select the desired
Context that will contain the new printer.
3. Select Object from the menu bar and then Create . When you get the
New Object menu, select Printer and then OK .
4. Enter the name of the printer and select Create .
5. Double click on the print server name of your PSERVER NLM. Click
on Assignments and then Add...
6. If necessary, change the directory context. Select the printer you
created and click OK . Note the number of the printer, as you will use
this later, then click OK .
7. Select the desired Context that will contain the default print queue,
and then click on Object and Create to get New Object menu.
8. Select Print Queue and then OK . Make sure that Directory Service
Queue is selected, and then type in a name for the default print queue.
9. Click on the button to select the print queue volume. Change the
directory context if necessary, then select the desired volume
(Objects) and click OK . Click Create to create the print queue.
10. Change context if required and then double click the name of the
printer you created previously.
11. Click Assignments and then Add..
12. Change context if necessary and select the print queue you created.
Click OK and then OK again, and then exit NWADMIN.
13. Start the appropriate BRAdmin application, and select the correct
print server you wish to configure (by default, the node names will
begin with BRO_xxxxxx_P1, BRO_xxxxxx).
1-7
Advertisement
Table of Contents
Troubleshooting
