Using Other Methods To Configure Your Machine For A Network - Brother TD-series User Manual

c
Double-click the unconfigured device.
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• If the device requires a password, the default password is access.
• You can find the node name and Ethernet address by printing out the Printer Settings Page. See Printing
the Printer Settings on page 13.
d
Choose STATIC from Boot Method. Enter the IP address, Subnet Mask and Gateway (if needed) of
your print server.
e
Click OK.
f
With the correctly programmed IP address information you will see the Brother print server in the device
list.

Using other methods to configure your machine for a network

You can configure your network printer using other methods. See Other ways to set the IP address (for
advanced users and administrators) on page 24.
Configuring your network printer
2
2
11