Configuration Server - Brother NC-series User Manual

USER'S GUIDE

Configuration Server

1. From the OS/2 desktop open the Templates folder. Use the right mouse
2. The Create a Printer window should be open (if it is not, double click
- Type in any name for the printer.
- Select the default printer driver. If the desired printer driver is not listed,
- Choose the output port. IBM TCP/IP automatically creates 8 named pipes
You will get the Settings window. Enter the following:
LPD server
LPD printer
Host name
User
You may leave the other entries blank. Click on the OK button. The pipe
should be highlighted; if not click on it.
Click on the Create button to create the printer.
3. Open the LAN Services folder and execute the LAN Requester
button to drag the Printer icon (not the Network Printer icon) onto the
desktop.
on the printer icon).
click on the Install new Printer Driver button and add the driver.
called \PIPE\LPD0 through to \PIPE\LPD7. Pick an unused port and
double click on it.
Note
Early versions of Warp Server have a bug in which the named pipes do
not appear (the problem does not affect Warp Connect or LAN Server).
This problem is fixed via a patch available from IBM.
program:
The Brother print server name (from the
HOSTS file)or its IP address.
For most applications, use the Brother print
server 'binary' service BINARY_P1.
However, if you are printing text files from
the DOS or OS/2 command prompt, you
should use the text service TEXT_P1,
which will add carriage returns for proper
formatting of the data (but will potentially
distort graphics printouts).
The IP name of the OS/2 file server
The IP address of the OS/2 file server
3-12