3-48
Using the PSIII
Figure 3-66 Password dialog box
Figure 3-67 Old Password dialog box
NOTE
Figure 3-68 New Password dialog box
Password
Passwords are 4 characters long. The default password is 0000.
To Set a Password
Press FNC+3+7+4. A Password dialog box displays
Step 1
Password
[1]Set
[2]Reset
Press the FNC key or 1. For Mode 2* systems, an Old Password dialog
Step 2
box displays
(Figure
Old Password?
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
Type in the old password.
Step 3
Press the FNC key to confirm the old password. A New Password dialog
Step 4
box displays
(Figure
Old Password?
3-67).
3-68).
Dterm PSIII User Guide - Revision 1
(Figure 3-66)