Protect Dir Dialog Box; Password Prompt Dialog Box - NEC Dterm PSIII User Manual

3-50 Using the PSIII
Figure 3-70 Protect DIR dialog box
Figure 3-71 Password Prompt dialog box
NOTE
NOTE
To Turn On Directory Protection
Press FNC+3+7+5. A Protect DIR dialog box displays
Step 1
Protect DIR
[1]On
[2]Off
Press the FNC key or 1. For Mode 2* systems, a Password Prompt
Step 2
dialog box displays
Password?
Type in the password and then press the FNC key to confirm. A
Step 3
confirmation screen displays.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
To Turn Off Protect Directory
Press FNC+3+7+5. A Protect DIR dialog box displays
Step 1
Press the FNC key or 2. For Mode 2* systems, a Password Prompt
Step 2
dialog box displays
Type in the password and then press the FNC key to confirm. A Protect
Step 3
DIR confirmation screen displays.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
(Figure 3-71).
(Figure 3-71).
Dterm PSIII User Guide - Revision 1
(Figure 3-70).
(Figure 3-70).