Trunk Ring; Trunk Ring Pattern Dialog Box; Trunk Ring Options Dialog Box - NEC Dterm PSIII User Manual

3-34 Using the PSIII
Figure 3-41 Trunk Ring Pattern dialog box
Figure 3-42 Trunk Ring Options dialog box
NOTE
NOTE

Trunk Ring

This feature allows you to assign an incoming call ring pattern. The ring
patterns can differ for an internal incoming call or an external incoming
call.
To change the Trunk Ring pattern, press FNC+3+4+4. A Trunk Ring
Step 1
Pattern dialog box
Trunk Ring
[1]L1
[2]L2
Select L1 or L2* by using the Scroll
Step 2
systems, a Trunk Ring Options dialog box displays
Trunk Ring
1 2 3 4 5 6 7 8
Press the Scroll
Step 3
different Trunk Ring pattern.
Press the FNC key to confirm.
Step 4
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
The default Trunk Ring pattern is 2.
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
displays(Figure 3-41).
or Scroll
or Scroll keys, or the number key to select a
Dterm PSIII User Guide - Revision 1
keys. For Mode 2*
(Figure 3-42).