To Review A Text Message; Text Message Dialog Box - NEC Dterm PSIII User Manual

NOTE
NOTE
NOTE
NOTE
Figure 3-20 Text Message dialog box
Dterm PSIII User Guide - Revision 1
Operate according to the audio assistance to receive VM.
Step 3
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.

To Review a Text Message

This feature depends on the OAI application.
When receiving a Text Message or when pressing the FNC+2 key, a
Step 1
Message Services dialog box displays
Select [2] TM Review and then press the FNC key or 2. A dialog box
Step 2
displays listing the number of new text messages and the total number of
text messages.
When receiving a voice mail and text message, the LCD displays both VMM and
TMM.
If Protect DIR is on, a password is required.
After two seconds, a Text Message dialog box displays
H#01 Jan/21 17:00
L#02 Jan/20 15:00
Press the Scroll
Step 3
then press the FNC key or wait for two seconds to review. The detailed
message displays.
Press the FNC key to return the TM list.
Step 4
To delete the message, press CLEAR. A Delete Message dialog box
Step 5
displays (Figure
There is the gro
* Group meeting
or Scroll key to locate the desired message and
3-21).
Using the PSIII
(Figure 3-19).
(Figure
3-21
3-20).