Answer Tone Dialog Box - NEC Dterm PSIII User Manual

NOTE
Figure 3-65 Answer Tone dialog box
Dterm PSIII User Guide - Revision 1
Press the FNC key to enter.
Step 5
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Turn Off Automatic Answer
Press FNC3+7+2. An Automatic Answer dialog box displays
Step 1
(Figure 3-62).
Select L1 or L2 by using the Scroll
Step 2
systems, an Auto Answer On/Off dialog box displays
Select [2] Off and then press the FNC key or 2.
Step 3
Press the FNC key to enter. A reset confirmation screen displays.
Step 4
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
Answer Tone
This feature enables you to hear a warning tone for an incoming call
before Auto Answer.
To Turn On Answer Tone
Press FNC+3+7+3. An Answer Tone dialog box displays
Step 1
Answer Tone
[1]On
[2]Off
Select [1] On and then press the FNC key or 1 (for Mode 2* systems).
Step 2
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Turn Off Answer Tone
Press FNC+3+7+3. An Answer Tone dialog box displays
Step 1
Select [2] Off and then press the FNC key or 2 (for Mode 2* systems).
Step 2
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
Using the PSIII
or Scroll keys. For Mode 2*
(Figure 3-63).
(Figure
(Figure
3-47
3-65).
3-65).