Figure 3-61 Headset Ring dialog box
NOTE
NOTE
Dterm PSIII User Guide - Revision 1
Headset Ring
When using a headset, this feature allows your PSIII to ring through to
your headset.
To Turn On Headset Ring
Press FNC+3+7+1. A Headset Ring dialog box displays
Step 1
Headset Ring
[1]Auto
[2]On
[3]Off
Select [2] On and then press the FNC key or 2. For Mode 2* systems, a
Step 2
confirmation screen displays.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Turn On Automatic Headset Ring
Automatic headset ring causes your PSIII to ring automatically in the
headset whenever a headset is plugged in.
Press FNC+3+7+1. A Headset Ring dialog box displays
Step 1
Select [1] Auto (for Mode 2* systems).
Step 2
Press the FNC key or 1 to turn on Automatic Headset Ring.
Step 3
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
To Turn Off Headset Ring
Press FNC+3+7+1. A Headset Ring dialog box displays
Step 1
Select [3] Off (for Mode 2* system).
Step 2
Press the FNC key or 3 to turn off Headset Ring.
Step 3
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
Using the PSIII
3-45
(Figure
3-61).
(Figure
3-61).
(Figure
3-61).