To Make A Call; Onhook Dialog Box; Offhook Dialog Box - NEC Dterm PSIII User Manual

3-6 Using the PSIII
NOTE
Figure 3-6 Onhook dialog box
NOTE
Figure 3-7 Offhook dialog box
NOTE

To Make a Call

To make a call, ensure that the battery is charged and the PSIII is turned on.
Onhook Dialing
Enter the telephone number.
Step 1
Press the L1 or L2* key. An Onhook dialog box displays
Step 2
If the Calling Party Name is not available, then the calling party number will appear in
the display.
Offhook Dialing
Press the L1 or L2* key.
Step 1
Enter the telephone number. An Offhook dialog box displays
Step 2
(Figure 3-7).
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
Mode 1
95551212
Mode 1
95551212
L 1
(Figure
Mode 2*
C.Cross
95551212
Mode 2*
C.Cross
95551212
L 1
Dterm PSIII User Guide - Revision 1
3-6).