Confirmation Tone; Key Click; Key Click Dialog Box - NEC Dterm PSIII User Manual

3-24 Using the PSIII
NOTE
Figure 3-24 Key Click dialog box

Confirmation Tone

Activating this feature enables you to hear a tone when you have made
an error or confirms that you entered information properly.
To Turn On Confirmation Tone
Press FNC+3+1+4.
Step 1
For Mode 2* systems, select [1] On and then press the FNC key or 1.
Step 2
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Turn Off Confirmation Tone
Press FNC+3+1+4.
Step 1
For Mode 2* systems, select [2] Off and then press the FNC key or 1.
Step 2
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.

Key Click

Activating Key Click enables you to hear a beep when you press each key.
To Turn On Key Click
Press FNC+3+1+5. A Key Click dialog box displays
Step 1
Key Click
[1]On
[2]Off
For Mode 2* systems, select [1] On and then press the FNC key or 1.
Step 2
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
(Figure 3-24).
Dterm PSIII User Guide - Revision 1