Call Forwarding - No Response Access No? Dialog Box - NEC Dterm PSIII User Manual

3-40 Using the PSIII
Figure 3-50 Call Forwarding - No Response Access No? dialog box
NOTE
For Mode 2* systems, a Call Forwarding - No Response Access No?
dialog box displays
Access No?
Type in the access code to establish Call Forwarding - No Response.
Step 3
*9=Call Forwarding - No Response, Set.
Example:
Press the FNC key to enter.
Step 4
Press the FNC key to confirm.
Step 5
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Cancel Call Forwarding - No Response
Press FNC+3+5+4. A Call Forwarding - No Response Access Code
Step 6
dialog box displays
Press the FNC key or 2.
Step 7
For Mode 2* systems, a Call Forwarding - No Response Access No?
dialog box displays
Type in the access code to cancel Call Forwarding - No Response.
Step 8
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
#9=Call Forwarding - No Response, Cancel.
Example:
Press the FNC key to enter.
Step 9
Press the FNC key to confirm.
Step 10
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
(Figure 3-50).
(Figure 3-49).
(Figure 3-50).
Dterm PSIII User Guide - Revision 1