To Set A Voice Mail Number; Message Storage; Vm Number Dialog Box; Msg Storage Dialog Box - NEC Dterm PSIII User Manual

NOTE
Figure 3-33 VM Number dialog box
NOTE
NOTE
Figure 3-34 MSG Storage dialog box
Dterm PSIII User Guide - Revision 1

To Set a Voice Mail Number

This feature depends on the external Voice Mail Server.
Press FNC+3+3+1. A VM Number dialog box displays
Step 1
VM Number
[1]Set
Select [1] Set.
Step 2
Type in the number and then press the FNC key to enter.
Step 3
Press the FNC key again to confirm.
Step 4
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.

Message Storage

This feature enables you to set the PSIII to overwrite or save a Text
Message when it arrives at the mail box of the Server (external
equipment).
This feature depends on the OAI application.
TM transmission route is only one way: STM Server to PSIII.
Press FNC+3+3+2. A MSG Storage dialog box displays
Step 1
MSG Storage
[1]HNL
[2]-NL
[3]---
Using the PSIII 3-29
(Figure 3-33).
(Figure 3-34).