Speaker Ring; Ring Volume Control Dialog Box - NEC Dterm PSIII User Manual

3-32 Using the PSIII
Figure 3-38 Ring Volume Control dialog box
NOTE
NOTE
Ring Volume
Do one of the following to control the ring volume:
Step 3
—To turn off the ring, press the Scroll
key or wait five seconds.
—To turn up the ring volume, press the Scroll
—To turn down ring volume, press the Scroll
*Mode 2 features are only available on NEAX 2000 IVS Series 1900 software or
NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00 software or
later.

Speaker Ring

The Speaker Ring option is for Mode 2* Systems Only.
This feature allows you to disable an incoming call from ringing while
you are on a call.
To disable the speaker ring, press FNC+3+4. A Ring Options dialog box
Step 1
displays (Figure
Select [2] Speaker Ring and then press the FNC key or 2.
Step 2
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
Standard
3-37).
Dterm PSIII User Guide - Revision 1
key two times. Press the FNC
key.
key.