Destination Options Dialog Box; Time Display Dialog Box - NEC Dterm PSIII User Manual

3-42 Using the PSIII
Figure 3-54 Destination Options dialog box
Figure 3-55 Time Display dialog box
To Reset Call Forwarding Destination
Press FNC+3+5+5. A Destination dialog box displays
Step 7
Select [2] Reset.
Step 8
Press the FNC key or 2. A Destination Options dialog box displays
Step 9
(Figure 3-54).
Destination
[1]Group
[2]Desk
[3]Voice Mail
Select the destination to erase and then press the FNC key.
Step 10
Confirm the displayed destination to erase (flashing) and then press the
Step 11
FNC key. A screen displays confirming the Destination is reset.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Set Time Display
Press FNC+3+6+1. A Time Display dialog box displays
Step 1
Time Display
[1]On
[2]Off
Select [1] On and then press the FNC key or 1. A screen displays
Step 2
confirming the Time Display is on.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Disable Time Display
Press FNC+3+6+1.
Step 3
Select [2] Off and then press the FNC key or 2. A screen displays
Step 4
confirming the Time Display is off.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
(Figure 3-51).
(Figure 3-55).
Dterm PSIII User Guide - Revision 1