Setup Menu Dialog Box - NEC Dterm PSIII User Manual

NOTE
NOTE
Figure 3-84 Setup Menu dialog box
Dterm PSIII User Guide - Revision 1
To Forward All Calls
While the PSIII is in a standby state, press FNC+5. A Forward Phone
Step 1
dialog box displays
Select [3] CFW All.
Step 2
Select [1] Set and then press the FNC key or 1.
Step 3
For the call forwarding destination, refer to the procedure in
on page 3-55.
To Forward No Response Calls
This feature is useful when the PSIII is turned off or has left the service
area.
While the PSIII is in a standby state, press FNC+5. A Forward Phone
Step 1
dialog box displays
Select [4] CFW N/R.
Step 2
Select [1] Set and then press the FNC key or 1.
Step 3
For the call forwarding destination, refer to the procedure in
on page 3-55.
Phone Number
Setting this feature displays your Phone Number while time display is
On.
Press the FNC key while in the standby state. A Setup Menu dialog box
Step 1
displays (Figure
[3]Setup Menu
[4]Soft Key
[5]ForwardPhone
[0]Phone No.
Select [0] Phone No. The phone number will temporarily display on the
Step 2
LCD.
(Figure 3-79).
(Figure 3-79).
3-84).
Using the PSIII 3-57
"To Forward Busy Calls"
"To Forward Busy Calls"