Warning - NEC Dterm PSIII User Manual

2-2 Safety

Warning

• Do not use, leave, or recharge the battery pack near fire or under
direct sunlight. High temperature may damage the internal safety
circuit and may cause malfunction of the recharger, heat, explosion,
or fire.
• Turn the power of the PSIII off and disconnect the recharger from the
power supply if you notice smoke, a strange odor, or anything else
unusual. Make sure that the PSIII and recharger are not smoking,
then contact the nearest NEC service office. Never attempt to repair a
malfunctioning PSIII by yourself.
• If the PSIII or recharger is dropped or broken, turn the power of the
PSIII off and disconnect the recharger from the power supply. Contact
the nearest NEC service office. Using a damaged PSIII may cause fire
or electric shock.
• If water gets inside the PSIII, turn the power off immediately. For the
recharger, disconnect the power plug immediately. Contact the
nearest NEC service office. Using a damaged PSIII may cause fire or
electric shock.
• Do not insert flammable or metal objects into the PSIII. If a foreign
object is accidently inserted into the PSIII, turn the power of the PSIII
off and disconnect the recharger from the power supply. Contact the
nearest NEC service office. Using a damaged PSIII may cause fire or
electric shock. Pay close attention to children to avoid accidents.
• Do not attempt to disassemble or modify the PSIII. Doing so may
cause fire, electric shock, or system malfunction. Modification by a
user is prohibited by law.
• Do not open the units. Doing so may cause electric shock or system
malfunction. Contact the nearest NEC service office to make
adjustments or repair the PSIII.
• Do not twist or place heavy objects on the PSIII. Doing so may cause
damage, fire, or injuries.
• Do not set any foreign object on the PSIII. Contact with water or
metal may cause fire or electric shock.
• Do not use the PSIII in a high humidity area such as a rest room or
near a humidifier. Doing so may cause fire, electric shock, or system
malfunction.
• Only use the power adapter approved by NEC. Other power adapters
may cause fire or system malfunction.
• Do not modify the power adapter cord. Do not kink, pull, twist, or
bundle it. Do not place heavy objects on the power adapter cord.
Doing so may cause fire, electric shock, or system malfunction.
Contact the nearest NEC service office for a replacement adapter
cord.
• Do not touch the power plug with wet hands. Doing so may cause
electric shock or system malfunction.
• Do not touch the PSIII or replace a battery with wet hands. Doing so
may cause electric shock or system malfunction.
Dterm PSIII User Guide - Revision 1