Digits Dialog Box; Soft Key Reset Dialog Box; Soft Key Selection Dialog Box - NEC Dterm PSIII User Manual

3-28 Using the PSIII
Figure 3-30 Digits dialog box
Figure 3-31 Soft Key Reset dialog box
Figure 3-32 Soft Key Selection dialog box
Digits?
Enter up to 40 numbers to dial or access codes to initiate.
Step 7
Press the FNC key to enter.
Step 8
Press the FNC key again to confirm.
Step 9
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Reset Soft Keys
Press FNC+3+2 and then select [2] Reset. A Soft Key Reset dialog box
Step 1
displays (Figure
Soft Key
[1]Set
[2]Reset
Press the FNC key or 2. A Soft Key Selection dialog box displays
Step 2
(Figure 3-32).
Soft Key
[1]PICK
[2]PARK
[3]CAMP
Use the Scroll
Step 3
the soft key to erase.
Select the soft key to erase and then press the FNC key.
Step 4
Press the FNC key to confirm or END/PWR to cancel.
Step 5
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
3-31).
or Scroll keys to search the number and name of
Dterm PSIII User Guide - Revision 1