Replacing A Drum Cartridge - Xerox Versant 4100 Press Quick Start Manual

Maintenance
R R e e p p l l a a c c i i n n g g a a D D r r u u m m C C a a r r t t r r i i d d g g e e
Other than replacing a drum cartridge after 348,000 prints, you may need to replace a drum
cartridge if a drum cartridge is damaged by light, or if you are experiencing spots and streaks on the
printed output.
Note: All four Drum cartridges are interchangeable.
Important: After replacing the drum cartridge, the system automatically resets the High
Frequency Service Item (HFSI) usage counter of this CRU component to zero (0). Check the
Consumables screen for the reset and new status.
Caution: Do not leave the Drum Cartridge Drawer open for more than one minute. Exposing
the drum cartridges to direct sunlight or strong light from indoor fluorescent lighting for more
than one minute may cause image quality defects.
Caution: Replace drum cartridges while the press is powered ON.
1. Ensure that the press is not in operation and not currently printing jobs.
2. Open the press Left and Center Front doors.
3. Turn the R1-R4 Drum Drawer Handle clockwise to the unlock position.
40 Xerox ® Versant ®
Quick Start Guide
4100 Press