[Shutter Setting]; [Freeze]; [Side By Side] - Panasonic PT-DZ770E Operating Instructions Manual

[DISPLAY OPTION] menu

[SHUTTER SETTING]

Set opening/closing of the shutter when power is
turned on and after the power is turned off.
1) Press ▲▼ to select [SHUTTER
SETTING].
2) Press the <ENTER> button.
▶
z The [SHUTTER SETTING] screen is displayed.
3) Press ▲▼ to select an item.
■ To set [STARTUP] ▶
4) Select [STARTUP] in Step 3).
5) Press ◀▶ to switch.
▶
z The setting will change as follows each time
you press the button.
[OPEN]
Projection begins with the shutter
[OPEN] opened when the power is turned
on.
Projection begins with the shutter
[CLOSE]
closed when the power is turned on.
■ To set [SHUT-OFF] ▶
4) Select [SHUT-OFF] in Step 3).
5) Press ◀▶ to switch.
▶
z The setting will change as follows each time
you press the button.
[KEEP
CURRENT
STATE]
[KEEP Enters standby with keeping the
CURRENT shutter status before the power is
STATE] turned off.
Enters standby with the shutter
[CLOSE]
closed.
Enters standby with the shutter
[OPEN]
opened.
Note
z When you remove the projection lens to transport
the projector, entering standby with the shutter
closed is recommended to prevent the dust.
z The [POWER OFF(STANDBY)] screen is displayed
when the power is turned off regardless of the
shutter status.
64 - ENGLISH
[CLOSE]
[CLOSE] [OPEN]

[FREEZE]

The projected image is paused temporarily regardless
of the playback of the external equipment.
1) Press ▲▼ to select [FREEZE].
2) Press the <ENTER> button.
▶
z Press the <MENU> button to release.

[SIDE BY SIDE]

Displays two different input signals simultaneously.
1) Press ▲▼ to select [SIDE BY SIDE].
2) Press the <ENTER> button.
▶
z Displays the side-by-side screen.
Input A
3) Press the <MENU> button.
▶
z The [SUB INPUT SELECT] screen is
displayed.
4) Press ▲▼ to select the image to be
displayed on the input B.
z Press ▲▼ to select an image to display on the ▶
right side of the screen (Input B).
[VIDEO]
[OFF]
[HDMI]
5) Press the <ENTER> button.
Note
z To cancel the two window display, select [OFF], and
press the <ENTER> button.
z [FREEZE] is set on the Input A side.
z During the two window display, menu items cannot
be adjusted or set.
z The value of the Input A side is applied to
the [PICTURE] setting. (For [CONTRAST],
[BRIGHTNESS], [COLOR], [TINT], and
[SHARPNESS], respective values of both Input A
and B are applied.)
z The two window display maintains the aspect ratio
selected with the <ASPECT> button on the remote
control or the setting of [ASPECT].
z The two window display may not be available
depending on the combination of input signals.
Refer to "Two window display combination list"
( page 117) for details.

Input A Input B
[S-VIDEO]
[RGB1]
[RGB2]
[DVI-D]