[Color Correction]; [Contrast Mode] - Panasonic PT-DZ770E Operating Instructions Manual

■ To use a colorimeter to adjust the ▶
color matching
Use a colorimeter that can measure chromaticity
coordinates and luminance to change the colors
[RED], [GREEN], [BLUE], [CYAN], [MAGENTA],
[YELLOW], and [WHITE] to desired colors.
▶
zInputting the current luminance and
chromaticity coordinates
1) Press ▲▼ to select [COLOR
MATCHING].
2) Press ◀▶ to select [MEASURED].
3) Press the <ENTER> button.
▶
z The [MEASURED MODE] screen is displayed.
4) Press ▲▼ to select [MEASURED
DATA].
5) Press the <ENTER> button.
▶
z The [MEASURED DATA] screen is displayed.
6) Measure the luminance (Y) and the
chromaticity coordinates (x, y) using
the colorimeter.
7) Press ▲▼ to select a color, and press
◀▶ to adjust the setting.
8) Once all the input is completed, press
the <MENU> button.
▶
z The [MEASURED MODE] screen is displayed.
▶
zInputting the coordinates of a desired
color
9) Press ▲▼ to select [TARGET DATA].
10) Press the <ENTER> button.
▶
z The [TARGET DATA] screen is displayed.
11) Press ▲▼ to select a color and press
◀▶ to input coordinates for desired
colors.
12) Once all the input is completed, press
the <MENU> button.
Note
z Colors are not displayed properly when target data
is a color outside the region of this projector.
z Set the [AUTO TESTPATTERN] to [ON] to
automatically display a test pattern for use in
adjusting the selected adjustment colors.
z When using a colorimeter or similar instrument to
measure measurement data, measure the colors
displayed with [AUTO TESTPATTERN].
z A difference in the color coordinates of target
data and measurement values obtained from an
instrument may occur for certain instruments and
measurement environments used.
[DISPLAY OPTION] menu

[COLOR CORRECTION]

Colors can be adjusted and registered for each input
signal format.
1) Press ▲▼ to select [COLOR
CORRECTION].
2) Press ◀▶ to switch [COLOR
CORRECTION].
[OFF] Standard setting
For each of the four signal formats,
VIDEO, S-VIDEO, RGB, and
YC C /YP
B R
[USER] red, green, blue, cyan, magenta,
and yellow can be adjusted and
registered. Press the <ENTER>
button to set details.

[CONTRAST MODE]

There are two modes. Set according to the operating
environment.
1) Press ▲▼ to select [CONTRAST MODE].
2) Press ◀▶ to switch [CONTRAST MODE].
[NORMAL] Maximizes brightness.
[HIGH] Maximizes contrast.
P , six colors including
B R
ENGLISH - 59